sealed solder connectors

Features & Benefits

BUTT CONNECTOR INSTRUCTIONS

1. Strip both wires 3/8”
2. Intermingle wires
3. Center solder over wires
4. Heat tubing
5. Solder flows into wire

OTHER CONNECTOR INSTRUCTIONS 

1. Strip wire 3/8”
2. Insert wire into solder barrel
3. Heat tubing
4. Solder flows into wire

For best results: Use heat device of at least 1000°F/538°C. Don’t overheat tubing. Don’t isolate flame. Distribute heat evenly over tubing. Heat until solder flows into wires. To be sold only with installation instructions.

Unless otherwise stated: Rating: 221˚F Max., 600 V Max. building wire, Stranded copper wire only. Not for multiple wire connections

Translate »