sealed Tinted Clear connectors

Installation Instructions

BUTT CONNECTOR INSTRUCTIONS

  1. Strip both wires
  2. Insert wire into barrel
  3. Crimp wire to barrel
  4. Heat tubing

OTHER CONNECTOR INSTRUCTIONS

  1. Strip wire
  2. Insert wire into barrel
  3. Crimp wire to barrel
  4. Heat tubing

For best results: Use heat device of at least 1000°F/538°C. Don’t overheat tubing. Don’t isolate flame. Distribute heat evenly over tubing. To be sold only with installation instructions.

Unless otherwise stated:  Wire strip length 5/16”, Max. Temp 221°F, 600V Max. building wire, 1000V Max. signs & fixtures, stranded copper conductors only.

Translate »